Small Water Element (1” or 1 ¼” boss)

We stock a limited range of small water elements in the following Ohm ratings that have many applications in DIY projects on 12/24/48 and higher DC battery systems.

All elements have 1” BSP/NPT threads on the element and we also supply a brass adaptor for 1 ¼” BSP threads.

Ohms ratings as per table below, do not use above 1000W or 120 VDC.

On DC water elements good practice is to ensure:

• Termination points are tight
• No insulation or combustible material near element connections
• Terminal cover is metal to reduce any fire risk from an arching connections
• Check all dc connections annually for any sign of heat damage & rectify
• Ensure element has water cover at all times
• Clearly label how element is to be turned off 
• Comply with local wiring rules

Refer to PowerSpout Document Index Links for a complete index of documents.

Refer to PS MPPT DC water heater installation Guide June 16  for install instructions.